Need help?Do you have a question about the TAC Xenta 400 Series and is the answer not in the manual?
Explains the manual's organization and how to find information.
Defines key terms used throughout the documentation.
Highlights new additions or changes in the current document version.
Details special formatting, warnings, and notes used in the manual.
Lists other manuals and resources for further information.
Describes the physical components of the TAC Xenta system.
Outlines various configurations for using I/O modules in networks.
Details common characteristics, terminals, and indicators across modules.
Technical specifications and features of the digital input modules.
Technical specifications and features of the digital input/output modules.
Technical specifications for universal input/digital output modules.
Technical specifications for analog input/output modules.
Technical specifications for universal input/analog output modules.
Technical specifications and features of the analog input module.
Technical specifications and features of the analog output modules.
Instructions for physically mounting the I/O modules.
Covers general considerations and circuit principles for electrical connections.
Details on connecting module terminals and assembling components.
Recommended cable types, lengths, and requirements for the network.
Steps for setting up and configuring the I/O modules after installation.
General| Enclosure Rating | IP20 |
|---|---|
| Series | Xenta 400 |
| Type | I/O System |
| Category | I/O Systems |
| Supply Voltage | 24 V AC/DC ±10% |
| Output Types | Analog Outputs (AO); Digital Outputs (DO) (Relay) |
| Operating Temperature | 0°C to 50°C |
| Relative Humidity | 5% to 95% non-condensing |
| Mounting | DIN rail |
To Next Page
