Need help?Do you have a question about the TAC Xenta 451A and is the answer not in the manual?
Details the manual's organization, defines key terms like ASIC, and lists related documents.
Explains document formatting (Warning, Caution, Note, Hint) and new ASIC-based modules.
Describes the hardware units comprising TAC Xenta controllers and I/O modules, and their network configurations.
Presents a table detailing available I/O modules and their respective I/O configurations.
Covers general features, terminal layouts, and indicators applicable to all TAC Xenta I/O modules.
Details digital input, digital output, and universal input/digital output modules (411/412, 421/422, 421A/422A).
Describes analog input, analog output, and universal input/analog output modules (451/452, 451A/452A, 471, 491/492).
Guidance on mounting TAC Xenta controllers and I/O modules on DIN rails or walls, and enclosure details.
Covers general installation considerations, safety standards, and electrical connection principles.
Explains the circuit principles for various input/output types like current, voltage, digital, and thermistor inputs.
Details terminal blocks, unit assembly, and specifications for communication and I/O cables.
General| Product type | I/O Module |
|---|---|
| Analog inputs | 0 |
| Analog outputs | 0 |
| Supply voltage | 24 V AC/DC |
| Input Voltage | 24 V AC/DC |
| Output Voltage | 24 V AC/DC |
| Communication Protocol | Modbus RTU |
| Power Supply | 24 V AC/DC |
| Operating Temperature | 0 to 50 °C |
| Mounting | DIN Rail |
| Protection Class | IP20 |
| Communication | RS485 |
To Next Page
