Taco 0034ePlus User Manual

-13-
Technical Menu
Proceed as follows to access the technical menu:
1) Press the UP and DOWN buttons simultaneously for 5s, the message “tECH” will appear in the display.
2) Press the “SET” button and select the parameter to be displayed by pressing the UP or DOWN buttons. (See below).
3} Press the “SET” button and select the desired parameter.
IMPORTANT: After 10 seconds of inactivity, the circulator leaves the technical menu and returns to normal operation.
activeADAPT
0-10V
5 s
8888
W GPM RPMFT
C HE
Parameters Meaning
T 0 Display Firmware version
T 1 Inverter Firmware version
T 2
Unit of measurement shown on the display:
• SI = System International (European)
• IU = Imperial units
T 3 Maximum pump head
T 4 Analog input voltage 0-10V
T 5 “Duty Cycle” PWM input
T 6 Mains voltage
T 7 Internal inverter voltage
T 8
Pump working hours
(in thousands, 0.010 = 10 hours, 101.0 = 101,000 hours)
T 9 Ignitions counter
T 10 Standby counter
T 11 Rotor blocks counter
T 12 Step losses counter
T 13 Under voltages counter
T 14 Over voltages counter
T 15 Counter for missing internal cards communications

Taco 0034ePlus Specifications

General

Brand	Taco
Model	0034ePlus
Category	Controller
Language	English