14
TACTACAM.COM
TROUBLESHOOTING
Motion sensors Motion sensors (PIR sensors) are actually heat sensors. They “trigger” when detecting a
heat differential across the sensor. This is why on a hot and windy day, people get false triggers. People
and animals are not the only objects that will trigger your camera; vegetation and precipitation can act as
a moving target as well.
1. Be sure to clear any low hanging tree branches, brush, and weeds from the camera eld of view.
2. Motion sensitivity recommendations:
• Set to High, and decrease sensitivity if you’re getting too many false triggers.
CAMERA SENDS PICTURES OF NOTHING
1. Make sure your batteries have sucient power and the camera is on.
2. If using a non-Tactacam brand SD card, connect via Wi-Fi and format the SD card.
CAMERA STOPS TAKING IMAGES OR WON’T TAKE IMAGES
To Next Page
Loading...