To Next PageTo Next Page
Need help?Do you have a question about the Tadano GR-550XL and is the answer not in the manual?
Details the four-section synchronized telescoping boom, its dimensions, and extension speed.
Describes the hydraulic cylinder system for boom elevation control and speed.
Information on the two-stage bi-fold lattice jib, its offsets, and storage.
Details the single sheave auxiliary lifting sheave mounted on the main boom head.
Describes the pendant type over-winding cutout device with audio-visual warnings.
Explains the slewing mechanism, motor, reducer, and braking systems.
Covers the main and auxiliary hoist systems, including drum specifications and performance.
Specifications for the wire rope used, including type and breaking strength.
Details the available hook blocks, including capacities and types.
Information on the hydraulic pumps, control valves, reservoir, and oil cooler.
Description of the operator's cab, controls, and instrumentation.
Details the carrier drive type, axle configuration, and frame construction.
Information on the automatic transmission, speeds, and gradeability.
Describes the front and rear axle types and available steering modes.
Specifications for the Cummins QSB6.7 engine, including displacement and cooling.
Details the semi-elliptic leaf spring suspension and air-over-hydraulic brake systems.
Information on tire size and the four hydraulic outrigger beam and jack system.
Lifting capacities with outriggers fully extended at 22' 11-5/8" spread.
Capacities at zero boom angle with outriggers fully extended.
Lifting capacities with outriggers mid-extended at 21' 3-7/8" spread.
Capacities at zero boom angle with outriggers mid-extended.
Lifting capacities with outriggers mid-extended at 16' 4-7/8" spread.
Capacities at zero boom angle with outriggers mid-extended.
Lifting capacities with outriggers min-extended at 8' 1-5/8" spread.
Capacities at zero boom angle with outriggers min-extended.
Lifting capacities with outriggers extended and 28.9' jib attached.
Lifting capacities with outriggers extended and 50' jib attached.
Lifting capacities with mid-extended outriggers and 28.9' jib attached.
Lifting capacities with mid-extended outriggers and 50' jib attached.
Lifting capacities with mid-extended outriggers and 28.9' jib attached.
Lifting capacities with mid-extended outriggers and 50' jib attached.
General guidelines and warnings regarding rated lifting capacities.
Instructions for setting up the crane on firm supporting surfaces.
Key operational points for lifting, including load radius and boom angle.
Defines key terms used in lifting capacity charts and operations.
Lifting capacities for stationary operation over the front of the chassis.
Lifting capacities for 360-degree rotation while on rubber.
Lifting capacities for creep operation over the front of the chassis.
Capacities at zero boom angle during on-rubber operation.
Instructions for operating the AML-C system when the crane is on outriggers.
Instructions for operating the AML-C system when the crane is on rubber.
Important notes and limitations regarding the AML-C system's functionality.
Details the four-section synchronized telescoping boom, its dimensions, and extension speed.
Describes the hydraulic cylinder system for boom elevation control and speed.
Information on the two-stage bi-fold lattice jib, its offsets, and storage.
Details the single sheave auxiliary lifting sheave mounted on the main boom head.
Describes the pendant type over-winding cutout device with audio-visual warnings.
Explains the slewing mechanism, motor, reducer, and braking systems.
Covers the main and auxiliary hoist systems, including drum specifications and performance.
Specifications for the wire rope used, including type and breaking strength.
Details the available hook blocks, including capacities and types.
Information on the hydraulic pumps, control valves, reservoir, and oil cooler.
Description of the operator's cab, controls, and instrumentation.
Details the carrier drive type, axle configuration, and frame construction.
Information on the automatic transmission, speeds, and gradeability.
Describes the front and rear axle types and available steering modes.
Specifications for the Cummins QSB6.7 engine, including displacement and cooling.
Details the semi-elliptic leaf spring suspension and air-over-hydraulic brake systems.
Information on tire size and the four hydraulic outrigger beam and jack system.
Lifting capacities with outriggers fully extended at 22' 11-5/8" spread.
Capacities at zero boom angle with outriggers fully extended.
Lifting capacities with outriggers mid-extended at 21' 3-7/8" spread.
Capacities at zero boom angle with outriggers mid-extended.
Lifting capacities with outriggers mid-extended at 16' 4-7/8" spread.
Capacities at zero boom angle with outriggers mid-extended.
Lifting capacities with outriggers min-extended at 8' 1-5/8" spread.
Capacities at zero boom angle with outriggers min-extended.
Lifting capacities with outriggers extended and 28.9' jib attached.
Lifting capacities with outriggers extended and 50' jib attached.
Lifting capacities with mid-extended outriggers and 28.9' jib attached.
Lifting capacities with mid-extended outriggers and 50' jib attached.
Lifting capacities with mid-extended outriggers and 28.9' jib attached.
Lifting capacities with mid-extended outriggers and 50' jib attached.
General guidelines and warnings regarding rated lifting capacities.
Instructions for setting up the crane on firm supporting surfaces.
Key operational points for lifting, including load radius and boom angle.
Defines key terms used in lifting capacity charts and operations.
Lifting capacities for stationary operation over the front of the chassis.
Lifting capacities for 360-degree rotation while on rubber.
Lifting capacities for creep operation over the front of the chassis.
Capacities at zero boom angle during on-rubber operation.
Instructions for operating the AML-C system when the crane is on outriggers.
Instructions for operating the AML-C system when the crane is on rubber.
Important notes and limitations regarding the AML-C system's functionality.
General| Model | GR-550XL |
|---|---|
| Max Lift Capacity | 55 tons |
| Number of Axles | 2 |
| Transmission | Automatic |
| Drive Type | 4WD |
