To Next PageTo Next Page
Need help?Do you have a question about the Tadano GR-800XL and is the answer not in the manual?
Provides overall dimensions for the crane, including turning radius and tail swing.
Details the five-section synchronized telescoping boom specifications.
Describes the hydraulic cylinder system for boom elevation.
Information on the two-stage bi-fold lattice jib, including offsets.
Specification for the single sheave auxiliary lifting sheave.
Details the pendant type over-winding cut-out device.
Describes the hydraulic motor and planetary reducer for slewing.
Covers main and auxiliary hoist specifications, including drum and rope details.
Specifies the non-rotating wire rope class and breaking strength.
Lists the types and capacities of hook blocks included.
Details the pumps, valves, reservoir, and filtration of the hydraulic system.
Describes the operator's cab layout, controls, and instrumentation.
Carrier axle configuration and frame construction details.
Information on the electronically controlled full automatic transmission and axles.
Details on steering modes and suspension systems.
Specifications for brake systems and tire size.
Information on the four hydraulic beam and jack outriggers.
Details of the Cummins QSB6.7 diesel engine.
Details about the five-section boom and bi-fold lattice jib.
Grooved drums, cable followers, anti-two block, and twin slewing systems.
Includes AML-C, electronic monitoring, and pilot controls.
Seat, steering wheel, glass, heater, AC, and power windows.
Lights, mirrors, ashtray, and pump disconnect.
Electronic Load Moment Indicator system details and function.
Data on line speeds and pulls for main and auxiliary hoists.
Information on drum capacities for wire rope.
Physical dimensions of the hoist drums.
Working range chart for telescoping mode I.
Working range chart for telescoping mode II.
Lifting capacities for fully extended outriggers at 23' 11-3/8" spread.
Capacities at zero boom angle with fully extended outriggers.
Lifting capacities for mid-extended outriggers at 21' 11-3/8" spread.
Lifting capacities for mid-extended outriggers at 18' 1/2" spread.
Capacities at zero boom angle for mid-extended outriggers.
Lifting capacities for mid-extended outriggers at 33' 2" spread.
Lifting capacities for min-extended outriggers at 8' 10-5/16" spread.
Capacities at zero boom angle for min-extended outriggers.
Lifting capacities when operating on rubber tires.
Capacities at zero boom angle for on-rubber operation.
General guidelines and safety information for lifting capacities.
Instructions for setting up the crane for lifting operations.
Operational procedures and safety during lifting.
Glossary of terms used in lifting capacity charts.
Provides overall dimensions for the crane, including turning radius and tail swing.
Details the five-section synchronized telescoping boom specifications.
Describes the hydraulic cylinder system for boom elevation.
Information on the two-stage bi-fold lattice jib, including offsets.
Specification for the single sheave auxiliary lifting sheave.
Details the pendant type over-winding cut-out device.
Describes the hydraulic motor and planetary reducer for slewing.
Covers main and auxiliary hoist specifications, including drum and rope details.
Specifies the non-rotating wire rope class and breaking strength.
Lists the types and capacities of hook blocks included.
Details the pumps, valves, reservoir, and filtration of the hydraulic system.
Describes the operator's cab layout, controls, and instrumentation.
Carrier axle configuration and frame construction details.
Information on the electronically controlled full automatic transmission and axles.
Details on steering modes and suspension systems.
Specifications for brake systems and tire size.
Information on the four hydraulic beam and jack outriggers.
Details of the Cummins QSB6.7 diesel engine.
Details about the five-section boom and bi-fold lattice jib.
Grooved drums, cable followers, anti-two block, and twin slewing systems.
Includes AML-C, electronic monitoring, and pilot controls.
Seat, steering wheel, glass, heater, AC, and power windows.
Lights, mirrors, ashtray, and pump disconnect.
Electronic Load Moment Indicator system details and function.
Data on line speeds and pulls for main and auxiliary hoists.
Information on drum capacities for wire rope.
Physical dimensions of the hoist drums.
Working range chart for telescoping mode I.
Working range chart for telescoping mode II.
Lifting capacities for fully extended outriggers at 23' 11-3/8" spread.
Capacities at zero boom angle with fully extended outriggers.
Lifting capacities for mid-extended outriggers at 21' 11-3/8" spread.
Lifting capacities for mid-extended outriggers at 18' 1/2" spread.
Capacities at zero boom angle for mid-extended outriggers.
Lifting capacities for mid-extended outriggers at 33' 2" spread.
Lifting capacities for min-extended outriggers at 8' 10-5/16" spread.
Capacities at zero boom angle for min-extended outriggers.
Lifting capacities when operating on rubber tires.
Capacities at zero boom angle for on-rubber operation.
General guidelines and safety information for lifting capacities.
Instructions for setting up the crane for lifting operations.
Operational procedures and safety during lifting.
Glossary of terms used in lifting capacity charts.
General| Brand | Tadano |
|---|---|
| Model | GR-800XL |
| Category | Construction Equipment |
| Language | English |
