Whisper Page: Receiving 190 FlexSet 120/280 User Guide
Display Message Key LED
To put the second party on hold and talk privately to the whisperer:
1. Ask the party you are conversing with to hold on.
2. Press the flashing DSS key pre-programmed with the whisperer dial number
ANSWER
xxxx
ON
(or the flashing second LOOP key). Those keys are then lit. The original
conversing party is put on hold.
3. Talk to the whisperer.
4. After the whisperer disconnects, you are automatically reconnected to the
original conversing party.
Note: If you double-press the flashing DSS key, this will initiate a 3-way call,
i.e. the whisperer will hear you and the second party.
To initiate a 3-way call and add the whisperer:
1. Double-press the flashing DSS key pre-programmed with the whisperer dial
WHSPR PAGE
xxxx
FLASHING
number (or the second LOOP key). Those keys are then lit.
xxxx 3way yyyy
ON
Note: While in established 3-way call, pressing [XFER] allows you to switch
between different three party functions defined for your FlexSet (see
page 34).
To Next Page
Loading...
