8
Operation
If your audio-video equipment has a phase marking for the power cable input make
sure to connect correctly the equipment power cable plug to the power lter.
5. Turn on your audio-video equipment and enjoy your system.
6. Reset – the Power Output Sockets will be powered off when the maximum power
load is exceeded (check rear of the lter or specications).
Press the RESET button to restore the power supply.
Note! When you want to turn off the power lter we recommend to turn off your
audio-video equipment rstly.
PF-2000 PF-1000
Max Spike Volt 3000V
Max Surge Current 1000A
Max Clamping Volt 470V
Noise Filter >-10dB (2-100MHz)
Sockets 2 Direct, 5 Filtered 4 Direct, 4 Filtered
Total Maximum Power Load
(for all Power Sockets)
10A, 2500W
AC Power 230V~240V 50/60Hz
Power Consumption <0.1W
Dimensions (H x W x D) 10 x 44 x 31 cm 9 x 14 x 44.5 cm
Weight (net) 5.1 kg / pc. 3.2 kg / pc.
We reserve the right to change the technical data and the design of the product without notice as a result of further development.
Specications
To Next Page
Loading...
