WiFi Inventory Reader
5.4.4 Saving Inventory Results
To save the results of the inventory, click Save on the main screen to record inventory data in the
InventoryResult.txt file in the following format:
{ID#1}{Title}{Search_Status}{ Location_Status}
{ID#2}{Title}{Search_Status}{ Location_Status}
…
…
{ID#n}{Title}{Search_Status}{ Location_Status}
Where,
ID#n: 16 digits (first 64 bits of the C370 user memory)
Title: title of the item
Search_Status : “Found” if the item has been found or “----“ if the item is not included in the search
list
Location_Status : “-- OK –“ if the item is located on the correct shelf or “other_shelf_color” if the
item is misplaced
June 2007 Revision 1.1c 27/36
To Next Page
