WiFi Inventory Reader
6 Px Explorer
All Tagsys readers are delivered with Explorer software tools to quickly and easily test a reader.
The WiFi Inventory Reader can be tested using Px Explorer. This utility can perform reading and
writing operations, firmware update and display additional information such as Product Reference,
firmware version. This section describes how to start with Px Explorer.
6.1 Installing Px Explorer
To install Px Explorer software, insert the product CD-ROM into the disk drive on your PC and run
the Setup from the Medio P101 - Software Suite\Tools\Px Explorer 1-5-7 folder and click “Next”
Click the “Browse” button if you want to choose a specific installation folder.
28/36 Revision 1.1c June 2007
To Next Page
