Need help?Do you have a question about the Taico TK4800 and is the answer not in the manual?
Essential checks and preparations before installing the battery module.
Instructions and prohibitions for the safe operation and handling of the battery.
Provides the physical dimensions of the battery module.
Lists key electrical and physical specifications, including voltage, capacity, and charging parameters.
Details the various ports and connectors on the battery module.
Explains the function and operation of the reset button.
Describes the RS485 and CAN communication interface via RJ45 port.
Details the second RS485 interface, including its dual nature and baud rate.
Covers the RS232 communication port, its connector, and pin assignments.
Explains the use of DIP switches for setting the module's communication address.
Describes the meaning of different LED indicators and their operational states.
Illustrates a typical system setup including PV array, inverter, and battery module.
Lists tools necessary for battery installation, emphasizing insulation.
Recommends wearing safety equipment when handling the battery pack.
Specifies conditions for the installation site, including waterproofing and temperature.
Instructions for placing the module into a cabinet and connecting wires.
Diagrams and notes for connecting multiple batteries in parallel.
Analyzes causes and solutions for undervoltage alarms.
Troubleshoots issues related to discharge over-current protection.
Explains causes and recovery for temperature protection events.
Diagnoses and resolves issues when the battery has no voltage output.
General| Type | Tripod |
|---|---|
| Material | Aluminum Alloy |
| Foldable | Yes |
| Adjustable | Yes |
| Compatibility | Cameras |
To Next Page
