Taig Tools Micro Lathe II - Lathe Components; Component Diagram and Labels; General Safety Precautions

Your Lathe
t
Carriage
"Handwheel
Gib
Lock Carriage
~ assembly
Gib
Adjust
~
Headstock
Spindle
~;.
Headstock Tool Post/ ...... ~f ........... --.......!i-----. ......
assembly ;t
Crosslide I
Carriage
Depth Stop Crosslide Dial
~~i~::'~~?:F~:Y~;:~lt~~~~::,;?;-:!;~::""::",I------
.. -.~ ;.' '."~-.":: .~::.~): ~_., ' .:: / 1-- ....
Rotation
CAUTION:
- Always use SAFETY GLASSES to protect eyes from chips.
- Tighten chucks securely to avoid unscrewing during operation.
- DO
NOT slow lathe with hand on pulley.
- Operate chucks in excess of middle speed with care.
-
DO NOT have the belt tight as this causes the spindle to
stop quickly and may cause the chuck to unscrew.