Tainet T-336C Series - User Manual

使 用 手 冊
網路型數據機
T-336Cx/Nx/NDx
Version: 1.6
Date: 2006/8/10
P/N: 07006-00014
Headquarters:
No. 25, Alley 15, Lane 120,
S
EC. 1. NEI-HU RD,
Taipei 114, Taiwan
TEL: 886-2-26583000
FAX: 886-2-26583232
Beijing Branch:
3F, A Building,
113 Zhi Chun Lu,
HaiDian District,
Beijing, China
Zip Code: 100086
TEL: 86-10-62522081~87
FAX: 86-10-62522077

Summary

TAINET 網管系列 MODEM 介紹

1.1 概述 (Description)

Overview of TAINET managed series MODEM, including T-336Cx/Nx/NDx models.

1.2 技術規格(Technical Specifications)

Technical specifications and standards compliance for T-336Cx/Nx/NDx modems.

一般功能應用指南

4.1 前言 (PREVIEW)

Introduction to common usage methods for TAINET series modems.

4.2 撥接線和專線(Dial Line VS. Leased Line)

Explains dial-up lines and leased lines for modem communication.

4.3 二線式和四線式專線(2 W;4 W Leased Line)

Details two-wire and four-wire leased line configurations for modems.

4.4 應答端及呼叫端(Originate mode VS. Answer mode)

Explains the originate and answer modes for modem communication.

4.5 同步和非同步(Synchronous VS. Asynchronous)

Describes synchronous and asynchronous data formats for modem communication.

4.6 除錯與壓縮(Error Correction And Data Compression)

Features error correction and data compression for improved data transmission.

4.7 預設值檔案操作(Configuration Profile Setup)

Guide to using factory default and user-defined configuration profiles for modems.

4.8 遠端遙控功能操作(Remote Access)

Instructions for operating the remote access feature of the modem.

4.9 通信協定自動辨識功能(Multi-standard Handshake)

Explains the multi-standard handshake feature for automatic protocol recognition.

4.10 自動撥接備援功能(Auto Dial Backup)

Details the auto dial backup function for maintaining connection during leased line failure.

4.11 自動升降速功能(Auto Fallback And Fall Forward)

Describes auto fallback and fall forward for adaptive modem speed adjustment.

4.12 線路狀態顯示(Line Status Monitoring)

How to display and interpret line status parameters for troubleshooting.

4.13 誤碼率測試功能(B.E.R. Test)

Procedure for performing Bit Error Rate (BER) testing on the modem.

4.14 智慧型撥號功能(Intelligent Dial)

Features of the intelligent dial function for automatic dialing.

4.15 面板鎖定及密碼功能(Front Panel Lock & Password)

How to use front panel lock and password features for security.

4.16 模擬載波在半雙工傳輸模式

Explanation of simulated carrier in half-duplex transmission mode.

4.17 密碼及回撥(Dynamic Password; CallBack)

Details dynamic password and callback features for secure access.

4.18 智慧型輪撥功能(Intelligent Dial Polling)

Information on the intelligent dial polling feature.

指令說明

5.1 AT指令組(AT Command Set)

Explanation of the 'AT' command set for modem control.

5.2 AT指令組(續)

Continuation of the 'AT' command set, detailing more commands and parameters.

5.3 AT指令組(續)

Further details on the 'AT' command set, covering specific functions and modes.

5.4 撥號指令附屬碼(Dial Modifiers)

List and description of dial modifiers for AT and V.25bis commands.

5.5 AT指令回應碼(Result Code)

Table of AT command result codes, both short and long formats.

5.6 V.25 bis 自動撥號指令組(V.25 bis Auto Call Unit)

Details the V.25bis command set for automatic dialing.

維護須知

6.1 概述(Description)

Overview of maintenance procedures and troubleshooting for the modem.

6.2 測試儀器(Instruments)

Information on the instruments required for modem testing and maintenance.

6.3 定期維護(Periodic Manintenance)

Guidelines for performing regular preventive maintenance on the modem.

6.4 故障排除步驟(Troubleshooting)

Step-by-step troubleshooting guide for common modem issues.

6.5 回廠修理程序(Return Procedure)

Procedure for returning the modem for factory repair.

Appendix A T-336 Cx S-register Table

Appendix B T-336 Cx LCD Menu Quick Reference

Appendix C T-336 Nx LCD Menu Quick Reference

Tainet T-336C Series Specifications

General

Brand	Tainet
Model	T-336C Series
Category	Modem
Language	English