To Next PageTo Next PageWhat to do if the Tainet Modem power unit fails?
If no indicator lights up, it's likely a power unit issue. Ensure the modem is connected to a proper power source. Also, inspect the power fuse; replace it if it's broken.
How to troubleshoot RS-232 interface on Tainet T-336Cx Modem?
Ensure the interface is firmly connected and the cable is in good condition. Perform an AL (local analog loopback) test by feeding data into the modem and verifying if it's returned correctly.
General| Type | Modem |
|---|---|
| Model | T-336Cx |
| Interface | RS-232 |
| Operating Mode | Full Duplex |
| Power Supply | 9V DC |
Provides a high-performance, synchronous/asynchronous, full duplex multi-standard modem overview.
Details modem compliance with ITU-T, modulation types, speeds, error correction, and flow control.
Details the modem's front panel components: keys, LCD display, and LEDs for status monitoring.
Explains the function of each key, LED indicator, and the LCD display for modem operation.
Illustrates the hierarchical structure of the modem's menu system for configuration.
Provides in-depth explanations for each menu item within the modem's configuration structure.
Details support for MNP and V.42bis for error correction and data compression.
Describes how to use factory default and user-defined profiles for modem configuration.
Details the function for automatically switching to a dial line if the leased line fails.
Describes how to monitor line quality parameters like signal level, S/N ratio, and delay.
Provides a comprehensive list and description of AT commands for modem control.
Guides users through common troubleshooting steps for modem malfunctions.
