Tait Orca series - Removing the Shield from the Chassis

11/98 IPN: 449-51000-01 Servicing the radio D - 5
Figure D-3: Removing the front panel from the chassis, using the battery as leverage
Removing the shield from the chassis
7Rý UHPRYHý WKHýVKLHOGñý SODFHýWKHý UDGLRªVýLQWHUQDOý
DVVHPEO\ýRQýDýIODWýVXU IDFHýZLWKýWKHýVKLHOGýVLGHý
IDFLQJýXSýWRZDUGý\RXïý3UHVVýOLJKWO\ýGRZQýRQý
WKHýVKLHOGýDERYHýWKHýVORW ýFOLSýGHWDLOýõVKRZQýLQý
)LJXUHý'ðéôñýZ KLFKýZLOOýVOLJKWO\ýERZ ýWKHýVKLHOGý
DZD\ýIURPýWKHýFKDVV LVï
0DLQWDLQýSUHVVXU HýDQGýLQVHUWýDýIODWýEODG HGý
VFUHZGULYHUýõDSSUR[LPDWHO\ýéýPPôýLQýWKHýJDSý
EHWZHHQýWKHýVKLHOGýDQGýWKHýFKDVVLVïý 7ZLVWýWKHý
VFUHZGULYHUýDQGýWKHý VKLHOGýVKRXO GýULVHýXSýRYHUý
WKHýFOLSï
Figure D-4: Removing the shield from the chassis
1
2
4
5
3
6
7
battery pack
front panel
chassis
shield
1
2
3
4
microphone grommet protruding from the shield
grip battery here, gently pull away from the front panel
pull radio out and away from the front panel at this point
5
6
7
1
2
4
4
3
4
5
shield
chassis
slot clip detail
apply pressure here
insert screw driver here and twist
1
2
3
4
5