EasyManua.ls Logo

Tait TP9100 Series - User Manual

Tait TP9100 Series
78 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MPA-00034-02 · © Tait Limited · 11/2014
TP9100
Battery Charging Guide
Guide pour la charge de la batterie
Ladeanweisungen
Guia para carregar a bateria
Guía de carga de la batería
电池充电指南

Table of Contents

Questions and Answers

  • J
    Jamie HensleyAug 3, 2025
    What to do if the orange LED is flashing on my Tait TP9100?
    • B
      bradleystephanieAug 3, 2025
      If the orange LED is flashing, it could be due to several reasons: * The battery is not compatible with the charger. Use only Tait chargers and batteries. * The charger firmware is not compatible with the battery type. See "Checking the firmware version of your charger". * There is insufficient voltage to the charger. Check you are using the correct power adapter. * The battery may be deeply discharged (less than 3 V). Disconnect the battery from the radio and charge the battery. * The battery may be faulty. Consult your radio provider for advice. * If all orange LEDs are flashing on the multi-charger, the charger itself may be faulty (e.g. the fan may be jammed or faulty). Consult your radio provider for advice.
  • A
    Antonio AguirreAug 19, 2025
    Why is the orange LED steady on my Tait TP9100 Portable Radio charger?
    • M
      Michelle SharpAug 19, 2025
      A steady orange LED indicates that the battery is either too hot or too cold. Charging will start or resume once the temperature is within normal limits. No action is required.

Summary

About the Chargers

Multicharger Safety Information

Special Conditions When Using IS Radios

Before Using the Charger

Handle the Battery Safely

Instructions for safe battery handling to prevent injury or damage.

Charging Temperatures

Advice on avoiding extreme temperatures to maintain battery service life.

Low Battery Warning

Charging the Battery

Charging a Battery for the First Time

Charging a Battery

LED Behavior

Maintaining Battery Life and Performance

Conditioning NiMH Batteries

Troubleshooting the Charger

Checking Compatibility

Checking the Firmware Version of Your Charger

Tait TP9100 Series Specifications

General IconGeneral
Digital ProtocolDMR Tier II
Frequency Range400-470 MHz
Power Output5 W
Channel Spacing12.5 kHz / 25 kHz
Operating Voltage7.4 V DC (Nominal)
BatteryLi-Ion
Operating Temperature-30°C to +60°C
EncryptionAES-256

Related product manuals