Operating in trunked mode 99
Changing your queue settings
Your radio may be programmed so that you are able
to change queuing to ‘unanswered’. Unanswered
queuing means that all status and text messages are
immediately queued. Incoming voice calls are only
queued if they are unanswered.
If your radio has alphanumeric keys, you may be able
to change your call queuing setting using the keypad.
To activate call queuing:
■ press Menu and select Radio settings > Call
settings > Call queuing and choose On,
■ press the function key programmed for Call queu-
ing, or
■ dial *48 then press the # or PTT key.
The message Call queuing activated appears.
To change call queuing to unanswered call queuing:
■ press Menu and select Radio settings > Call
settings > Call queuing and choose Off,
■ press the function key programmed for Call queu-
ing, or
■ dial #48 then press the # or PTT key.
The message Call queuing deactivated appears.
To Next Page
Loading...
