Need help?Do you have a question about the TAJIMA TEJTII-C and is the answer not in the manual?
General| Brand | TAJIMA |
|---|---|
| Model | TEJTII-C |
| Category | Sewing Machine |
| Language | English |
Instructions for safe handling and transport of the machine.
Guidelines for electrical connections and grounding to prevent shock.
Procedures and precautions for operating the machine safely.
Identifies warning labels on the machine and explains their meaning.
Identifies and labels components of the embroidery machine.
Configuration settings via DIP switches DSW1 and DSW2.
Lists technical specifications like RPM, space, weight, and dimensions.
Procedures for powering the machine on, off, and emergency stop.
Steps for installing machine software from a PC or floppy disk.
A step-by-step guide to initiating an embroidery job.
Procedure for loading design data from a floppy disk.
Process to receive design data from a PC via network connection.
Method to input design data from a PC using a serial cable connection.
Assigning needle bar numbers to specific steps in the design.
Modifying needle bar numbers for each color change sequence.
Function to enlarge or reduce the design scale by percentage.
Rotating the design by specific angles like 45° or 90°.
Reversing the design horizontally or vertically on the X/Y axes.
Adjusting sensitivity for detecting thread breakage.
Configuring the machine to stop automatically after a set stitch count.
Lists error codes and corrective actions for machine stops.
Provides a table of common causes and adjustments for machine issues.
General warnings and cautions for performing daily maintenance tasks.
A schematic showing the connections between electrical components.
To Next Page
