Need help?Do you have a question about the TAJIMA TFHX-II and is the answer not in the manual?
Crucial safety instructions and warnings for machine operation.
Fundamental steps and procedures for operating the machine.
Procedures for setting and managing design data.
Configuration options for embroidery parameters and settings.
Methods for handling, editing, and storing design files.
Step-by-step guidance for manual control and adjustments.
Customization of machine functions through parameter adjustments.
Guidance on diagnosing and resolving machine errors and issues.
Procedures for cleaning, lubrication, inspection, and repair.
Guidelines for proper machine placement and environmental conditions.
Critical safety precautions to prevent accidents during operation.
Explanation of warning labels and their meanings for safe use.
Overview of the machine's primary capabilities and features.
Explanation of the user interface and control panel elements.
How to use the emergency stop for immediate machine shutdown.
Procedure for installing or upgrading the machine's CPU software.
Steps for installing software on the operation panel.
Detailed explanation of the information displayed on Screen 1000.
Detailed explanation of the information displayed on Screen 1100.
Pre-operation checks to ensure safety and machine readiness.
Overview of the Screen 2000 for embroidery settings.
How to load design data from a floppy disk.
Process for transferring design data via serial connection.
Steps for setting embroidery data and confirming the process.
Explanation of the Screen 5000 for needle bar settings.
Procedure for changing the needle bar assignment for design steps.
Adjusting frame position during automatic color changes.
Detailed explanation of the Screen 6000 for data conversion.
Adjusting the size of embroidery designs.
Rotating or mirroring designs.
Arranging designs in a repeating pattern.
Explanation of automatic frame offset settings.
Procedures for setting automatic frame offsets.
Overview of the Screen 2200 for design data management.
Process for saving designs to a floppy disk.
Steps to remove a design from the machine's memory.
Procedure to erase all designs stored in memory.
Setting automatic color change behavior.
Configuring automatic start functionality.
Diagnosing and resolving errors causing machine stops.
Common causes of troubles and their corresponding adjustments.
Safety guidelines for performing maintenance tasks.
Procedures and schedule for cleaning machine parts.
Guidelines and schedule for lubricating machine components.
Procedures and schedule for greasing machine parts.
Schedule and items for routine machine inspection.
Guidelines and precautions for machine repair procedures.
General| Brand | TAJIMA |
|---|---|
| Model | TFHX-II |
| Category | Sewing Machine |
| Language | English |
To Next Page
