Need help?Do you have a question about the TAJIMA TCMX 601 and is the answer not in the manual?
Critical warnings about potential severe injury or death during machine operation.
Cautions regarding potential minor injury or property damage during operation.
Identifies and explains various warning labels affixed to the machine.
Lists and describes the primary operational features of the machine.
Identifies specific components of the machine by name.
Explains the operation and function of the main power switch.
Controls for starting, stopping, and frame movement.
Instantly stops the machine in an emergency situation.
Describes the CM head component and its functions.
Details the functions of various keys on the operation panel.
Explains the main screen layout and information displayed.
Connecting external devices like USB or LAN.
Methods for moving the embroidery frame manually or via controls.
Adjusts machine speed (RPM) during operation or stop.
Instructions for inserting, handling, and ejecting floppy disks.
Instructions for inserting and handling memory cards.
Procedure for powering up the machine and initial screen display.
How to load embroidery designs into the machine from media.
Automates color changes and machine start after color change.
Sets stitch type and color scheme for designs.
Manually moves the frame to the starting point of a design.
Sets the maximum RPM for the machine.
Checks the switch for selecting the head to use.
Initiates the embroidery process.
Manual frame movement by stitch unit.
Quick frame movement to color change points.
Frame movement based on a specified number of stitches.
Manually changes the thread color.
Trims the thread manually.
Repeats design embroidery multiple times.
Returns the frame to the origin after embroidery.
Returns a moved frame to its original position.
Moves frame during automatic color change.
Automatically moves the frame to a desired position after embroidery.
Checks the embroidery range by moving the frame.
Configures frame back/forward and feed unit.
Checks design details, parameters, and error logs.
Moves the embroidery frame to the start position.
Displays total stitches and elapsed time.
Restores frame position after power interruption.
Displays the installed software version.
Stops the machine automatically at a set value.
Sets color scheme for each looper.
Auto-starts embroidery after data set.
Puts the machine into a power-saving standby mode.
Modifies design size, rotation, and direction.
Removes fine stitches from design data.
Edits or deletes stitch data within a design.
Inserts new stitch data into a design.
Saves design data to a floppy disk.
Deletes design data from a floppy disk.
Saves design data to a memory card.
Deletes design data from a memory card.
Deletes design data stored in the machine's memory.
Resets machine memory to factory defaults.
Adjusts the needle height manually.
Switches between loop and chain stitch types.
Returns the D-axis to its origin position.
Returns the looper to its fixed position.
Sets the speed for frame movement.
Sets the maximum RPM for the machine's main shaft.
Specifies the type of embroidery frame being used.
Adjusts the start timing of the embroidery frame drive.
Sets the upper limit for machine revolutions.
Applies brake to the main shaft motor when stopped.
Sets the sensitivity for detecting thread breakage.
Selects how thread ends are handled after trimming.
Sets tie stitches to prevent thread fraying.
Enables or disables the frame back function.
Instructions for installing software using floppy disks.
Instructions for installing software from a memory card.
Sets the display language for the machine interface.
Sets specific information about the machine type.
Makes the machine memorize the embroidery frame origin.
Sets or changes the machine's password.
Configures various machine parameters and options.
Enables the taping device for CM head.
Configures LAN network connection for communication.
Lists error codes and their corrective actions.
Explains common non-error related machine stops.
Troubleshoots general machine malfunctions.
Safety warnings related to machine maintenance.
Procedures for cleaning machine parts.
Instructions for lubricating machine components.
Procedures for greasing machine parts.
Guidelines for inspecting machine parts.
Safety and procedures for machine repairs.
Glossary of terms used in the manual.
Specifies the machine's ambient noise level.
Details the machine's power requirements and ratings.
Guidance on choosing needles for chenille work.
Proper combinations for chenille embroidery parts.
Wiring diagrams and system layout.
General| Brand | TAJIMA |
|---|---|
| Model | TCMX 601 |
| Category | Sewing Machine |
| Language | English |
To Next Page
