To adjust finishing of embroidering
120
Chapter 5
PT10
7-8. To embroider by using badly passing thread or loosely twisted thread (FS mode Lock)
This function will improve finish of sewing even in case of using badly passing threads (the tinsel, the thick
thread) or loosely twisted thread. (Conventional ratio) (p.253)
7-8-1. Explanation on the screen
7-8-2. How to operate
The following is an example of making FS mode Lock effective.
(1) Set to main screen.
(2) To press B key while pressing SET key
(3) Make FS mode Lock effective
YES: Make FS mode Lock effective
NO: Disable FS mode Lock.
To Next Page
Loading...
