TAJIMA TMEZ-SC User Manual

138 pages

To Next Page

M-EZ-UL01-EN

USER’S MANUAL

For Safe Use / Basic Operation

TMEZ-SC

Table of Contents5
For Safe Use11
For Safe Use12
Precautions in Handling12
Power Supply Precautions15
Important Warning Items for Safe Operation (for the US and Canada Market)17
About Warning Labels20
Type of Warning Labels20
Attaching Positions21
Safety Device23
Emergency Stop Switch23
Emergency Stop Switch Locations23
Operating the Emergency Stop Switch24
Resetting the Emergency Stop Switch25
Basic Operation29
Basic Operation of the Machine30
Turning ON/OFF the Power30
Turn on the Power30
Turn off the Power31
Start and Stop of the Machine32
Start the Machine32
Stop the Machine32
Multi-Color Leds33
Direct Command Switch34
Screen Operations36
Main Screen37
Design Selection Screen38
Description of Basic Icons39
Travel of Frame41
How to Move the Frame41
Changing the Travel Speed41
Checking the Frame Position (Coordinates)42
Data Input/Output43
Connecting a USB Memory43
Connecting a LAN Cable43
How to Embroider44
Basic Flow of Embroidery44
Embroidery Procedures45
Saving or Storing Designs into the Machine Memory45
Selecting the Embroidery Design (Data Setting)47
Setting of Needle Bar Step49
Confirmation of Design50
Setting the Embroidery Speed (Maximum R51
Checking the Embroidery Position (Execution of Trace)52
Starting Embroidery54
Completion of Embroidery55
Making Use of DCP56
Setting Items for Presser Foot56
About Setting Operation58
Settings on Needle Bar Setting Screen59
Settings on Manual Operation Screen60
Responding to Thread Breakage61
How to Respond to a Thread Breakage Indicator61
Repair Stitches62
Features of I-TM64
I-TM64
I-TM Operation Screen65
Adjusting the Finish of Sewing66
Adjusting the Thread Tightening66
Adjusting the Thread Tightening During Operation68
Storing the Control Pattern (Pattern Number)70
Storing the Control Pattern with a Name70
Overwriting and Saving the Control Pattern71
Dividing Step72
Dividing Step and Setting72
Deleting Divided Step75
Resetting of the Control Pattern76
Resetting of the Selected Control Pattern76
Batch Resetting of All the Control Patterns77
List Display and Editing of Control Patterns78
List Display of Control Patterns78
Searching Control Pattern by Name79
Adjusting Fabric Thickness and Stitch Thread Tightening (Detailed Setting Screen)79
Deleting Control Pattern80
Changing Control Pattern Name81
Manual Operation82
Moving Back or Moving Forward the Frame Along the Stitches82
Frame Back/Frame Forward by 1-Stitch Unit83
Frame Back/Frame Forward by Specifying the Number of Stitches84
Frame Back/Frame Forward by Specifying the Number of Color Change85
Thread Trimming86
Operating the ATH86
Needle Bar Related Operations87
Color Change87
Raising or Lowering the Needle Bar88
Stopping the Needle Bar at the Lower Dead Point89
Raising or Lowering the Presser Foot90
Various Frame Movement Operations91
Moving the Frame to the Preset Optional Position91
Moving the Frame to the Original Position (Manual Offset)92
Moving the Frame to the Start Position92
Moving the Frame to the Offset Position93
Moving the Frame by Entering a Numeric Value94
Absolute Origin Search95
Power Resume96
Other Operation97
Turning ON/OFF the LED Lamp97
Deleting or Saving Designs98
Deleting Designs98
Deleting a Design in the Machine Memory (One Design at a Time)98
Deleting Designs in the Machine Memory (Two or more Designs at Once)99
Deleting Designs in the USB Memory101
Saving Designs102
Saving Designs in the USB Memory102
Changing the Design Storage Location105
Changing a Design Name106
Precautions for Maintenance107
Maintenance107
Maintenance Item List108
Cleaning109
Inside of the Cylinder Bed109
Head and Its Surroundings110
X-Axis Drive System, Y-Axis Drive System111
Presser Foot Shaft111
Lubrication112
Rotary Hook112
Inside of Head113
Greasing114
Cylinder Bed Gear114
Inside of Head115
Inspection and Repair116
Inspection of Drive Systems and Sliding Parts116
Repair116
Checking and Adjustment117
Checking the Needle Bar Lower Dead Point117
Adjusting the Stroke Amount of the Thread Take-Up Spring119
Others121
Precautions to Take When Installing the Tension Base Cover121
Troubleshooting122
Message Screen122
When the Machine Does Not Sew Well127
Frequent Thread Breakages127
Needle Breaks127
Embroidery Results Not Good128
Power Resume after Power Failure129
Obtaining Log Data130

Questions and Answers:

M
Michelle BarrettAug 2, 2025
What to do if TAJIMA Industrial Equipment stops with frame stepping code?
- A
  angela34Aug 2, 2025
  If your TAJIMA Industrial Equipment stops due to a frame stepping code, you can resume operation by performing a “Start operation”, a “Frame Back/Forward operation”, or by pressing any operation key.