Various functions
154
Chapter 5
11-10. To move down/up the presser foot and needle bar before tracing
11-10-1. Explanation on the screen
11-10-2. How to operate
The following is the example of movng up the presser foot.
(1) Set to main screen.
(2) To press C key while pressing SET key
(3) Press C key.
(4) To move up the presser foot and needle bar before tracing
No: As it is (in the lowered state)
YES: To move up
When selecting "YES", do not access your hands etc. to needle because moving up of
the presser foot and needle bar before tracing could injure you.
6 Presser foot/Needle bar Up at tracing
NO
3 Presser foot installation
6 Presser foot/Needle bar Up at tracing
NO
UO04
To Next Page
Loading...
