31
SAFETY
Maintenance Precautions
Have a Takeuchi service agent
repair welding cracks or other
damage
Ask a Takeuchi service agent to repair any
welding problems which are detected. If not
feasible, make sure the welding is done by a
qualified person in a properly equipped
workplace.
Vibrations to which the operator
is subjected
According to the results of the tests carried
out to determine the vibrations transmitted
to the operator by the machine, the upper
limbs are subjected to vibrations lower than
2.5 m (8.2 ft) / sq.sec. while the seated part
of the body is subjected to vibrations lower
than 0.5 m (1.64ft) / sq.sec.
Checks after maintenance
¡Gradually raise the engine speed from a
low idle to maximum speed and check that
no oil or water is leaking from serviced
parts.
¡Move the controls and check that the
machine is operating properly.
Disposing of wastes
¡Funnel spent fluids from the machine into
containers. Disposing of fluids improperly
destroys the environment.
¡Follow the prescribed regulations when
disposing of oil, fuel, engine coolant,
refrigerant, solvents, filters, batteries or
other harmful substances.
To Next Page
Loading...
