To Next Page
K
kholtJul 28, 2025
How to jump start Takeuchi TB225 Excavators with a dead battery?
- SSteve RodriguezJul 28, 2025
To start the Takeuchi Excavators engine with a dead battery, use a booster battery from another vehicle and jumper cables. Ensure the vehicles don't touch and the cable clips don't touch each other. Connect the jumper cable to the positive (+) terminals first when connecting, and remove it from the negative (–) terminal first when disconnecting. Connect the last clip as far from the battery as possible. Wear protective goggles and use appropriately sized cables and clips. The booster vehicle's battery should match the dead machine's. Securely connect the clips, start the booster vehicle at high speed, then try starting the dead machine. Once running, disconnect the cables in reverse order. Alternatively, have your dealer recharge the battery.
General
