Takeuchi TB225 User Manual

8-8
OPTIONS
REPLACING THE HYDRAULIC OIL
REGULARLY
When a hydraulic breaker is used, the oil
deteriorates more quickly than that used for
a usual operation. Be sure to replace the
hydraulic oil and the return filter elements.
• Failure to replace these in time can lead to
damage to the machine and the breaker
hydraulic system. To improve the service
life of the hydraulic systems, be sure to
replace the hydraulic oil and return filter
element after the number of hours shown
on the diagram below.
• When replacing the hydraulic oil, clean the
suction strainer.
Replacement interval (hours)
Item Hydraulic oil Filter element
1st time — 25
2nd time — 100
Periodically 1200 (600) 200
When the breaker operating ratio is 100%.
( ): When using conventional antiwear
hydraulic oil.
HYDRAULIC BREAKER

Takeuchi TB225 Specifications

General

Engine Make	Yanmar
Max Dig Depth	2, 580 mm
Bucket Capacity	0.03 - 0.11 m3
Max Reach	7, 010 mm
Max Digging Depth	3, 870 mm