Takeuchi TB225 User Manual

8-16
OPTIONS
TAKEUCHI SECURITY SYSTEM
REGISTERING AND DELETING THE
STARTER KEY
• Sit on the operator's seat.
• Raise the safety lock lever to the locked
position.
• Clear all people from the machine and
the area.
• Sound the horn to warn people around
the machine.
Registration may fail if the starter key is on a
keyring or keychain; remove it before starting
registration.
A malfunction could occur if multiple starter
keys are brought near to the key cylinder. Be
sure that no starter keys other than the
correct key are near the key cylinder during
registration.
1. Insert the master key (1) into the starter
switch and turn the key from the OFF to
the ON (ACC) position.
Starter key registration procedure
For Steps 1 to 6 below, complete each step
and proceed to the next one within five
minutes. If no operation is performed for five
minutes during this procedure, the system
returns to the initial state.
From Step 7 onward, the system
automatically ends the operation if no
operation is performed for five minutes.

Takeuchi TB225 Specifications

General

Engine Make	Yanmar
Max Dig Depth	2, 580 mm
Bucket Capacity	0.03 - 0.11 m3
Max Reach	7, 010 mm
Max Digging Depth	3, 870 mm