Takeuchi TB290 - Page 130

3-28
OPERATION
•Whenclimbinginreverse,donotchange
directions at the point where the slope
starts.
•Avoidtravelingbysettingonecrawlerona
slopeorprojectingportionandtheother
crawler on a flat surface (with the machine
at a tilt of 10° or more). Travel with both
crawlers set on flat surfaces.
•Donotchangedirectionswhenthecrawler
belts are slack as shown in the figure.
•Therubbercrawlerbeltswillcomeoffifthe
machine travels backward in this condition.
•Therubbercrawlerbeltswillcomeoffifthe
machine turns in this condition.
HANDLING RUBBER CRAWLERS