6-5
TROUBLESHOOTING
Disconnecting the jumper cables
Once the dead machine is successfully
running,removethejumpercablesby
following the same steps as for connection in
the reverse order.
1.Disconnecttheclipofjumpercable(B)
from the engine block of the dead
machine.
2.Disconnecttheotherclipofjumpercable
(B) from the negative (–) battery terminal of
the booster vehicle.
3.Disconnecttheclipofjumpercable(R)
from the positive (+) battery terminal of the
booster vehicle.
4.Disconnecttheclipofjumpercable(R)
from the positive (+) battery terminal of the
dead machine.
Recharging
Ask your sales or service dealer for
recharging the dead battery.
IF THE BATTERY GOES DEAD
To Next Page
Loading...
