Takex F70A Series - F70 A Series Performance and Specifications; Rating and Performance Details; Operational Specifications; Sensitivity Setting and Functions

Rating/performance
F70A
・
F70series
■ Rating/Performance/Specification
Model
Power supply
Current
consumption
Control
output (*)
Stability
output (*)
Operation mode
Timer
Response time
NPN type
PNP type
NPN type
PNP type
NPN type
PNP type
NPN type
PNP type
F70AR
F70ARPN
Open collector output / Rating: sink current 50 mA (30 VDC max.) / Residual voltage: 1 V or less
Open collector output / Rating: source current 50 mA (30 VDC max.) / Residual voltage: 2 V or less
――――――
Light-ON/Dark-ON selectable
12-24V DC ±10% / Ripple 10% max.
39 mA max.
50 mA max.
Open collector output / Rating: sink current 100 mA (30 VDC max.) / Residual voltage: 1 V or less
Open collector output / Rating: source current 100 mA (30 VDC max.) / Residual voltage: 2 V or less
Light emission frequency channel 1: 600 μs max.
Light emission frequency channel 2: 700 μs max.
Light emission frequency channel 1: 500 μs max.
Light emission frequency channel 2: 600 μs max.
Output mode
F70AG
F70AGPN
F70AB
F70ABPN
F70AW
F70AWPN
F70R
F70RPN
F70G
F70GPN
F70B
F70BPN
F70W
F70WPN
Off delay/disabled selectable
Delay time: 40 ms fixed
On delay/off delay/on-off delay/disabled selectable
Delay time: selectable between 10, 20, 40, 60, 80, 100 and 120 ms / Default: 40 ms
15
Fiber optic sensors
Incandescent lamp: 10,000 lx / Sunlight: 20,000 lx
1-3 adjacent units in operation: −25 - ＋55 °C
4-10 adjacent units in operation: −25 - ＋50 °C
11-16 adjacent units in operation: −25 - ＋45 °C
Storage: −40 - ＋70 °C (non-freezing)
35-85%RH (non-condensing)
IP40
10-55 Hz / 1.5 mm amplitude / 2 hours each in 3 direction
500 m/s
2
/ 3 times each in 3 directions
Environment
■ Environmental Specification
Specification
Light source
(wavelength)
Indicator
Display
Switch
Sensitivity setting
Sensitivity setting input
Sensitivity adjustment function
Functions
Material
Connection
Mass
Accessory
Operation indicator: orange LED / Stability (STB) indicator: green LED
LCD display with backlight
Full auto teaching / Auto teaching
Set button input Set button input/external input
Provided (manual sensitivity adjustment)
Polycarbonate
For M8 connector specifications, see p. 23.
Permanently attached cord (outer dimension: dia. 4.8) 0.2sq. 3 core 2 m length Permanently attached cord (outer dimension: dia. 4.8) 0.2sq. 5 core 2 m length
Ambient light
Ambient
temperature
Ambient humidity
Protective structure
Vibration
Shock
Red LED
(660mm)
Green LED
(525mm)
Blue LED
(470mm)
White LED
Red LED
(660mm)
Green LED
(525mm)
Blue LED
(470mm)
White LED
2 set buttons / Mode selector switch: RUN/SET
Mounting bracket / Operation manual
(*) Avoid the transient condition (0.5 seconds) immediately after power-up for output.
●
Anti Mutual Interference feature
●
Short circuit protection feature
●
Sensor function: AUTO/TEACH/LOCK
●
Auxiliary function:
S for manual adjustment of sensitivity
and activation level
H for manual hysteresis setting
V for displacement indication and absolute
value indication modes
●
Anti Mutual Interference feature
●
Self-diagnosis feature
●
Short circuit protection feature
2 set buttons / Mode selector switch: RUN/SELECT/MODE
Approx. 80 g (including 2-m cord and mounting bracket)