Takstar WPM-200 User Manual (English)

Questions and Answers:

L
lori10Jul 28, 2025
Why does my Takstar Microphone have no sound?
- D
  Donald NelsonJul 29, 2025
  If your Takstar Microphone has no sound, there are several potential causes: * The transmitter might not be turned on, so ensure it is switched on. * The receiver might not be turned on; make sure it is also on. * The battery power could be low, in which case you should replace it with a new one. * The receiver volume might be too low; adjust the volume on the receiver. * There could be a wrong connection between the transmitter and sound source; try reconnecting it correctly. * The receiver might be too far from the transmitter, activating the mute control; use the receiver within the specified effective range. * The frequencies may not be matched; adjust the CH button on the receiver to match the transmitter's channel.
D
dspearsAug 7, 2025
What to do if my Takstar Microphone receiver picks up other sound or broadcasting?
- C
  Cynthia Romero MDAug 7, 2025
  If your Takstar Microphone receiver picks up other sounds or broadcasting, it might be because the transmitter's frequency is too close to another frequency channel. To resolve this, adjust both the receiver and transmitter to use a new channel.
D
dawn44Aug 16, 2025
How to fix a Takstar WPM-200 when the power indicator does not light?
- A
  Ashley CampbellAug 16, 2025
  If the power indicator on your Takstar Microphone doesn't light up, it could be due to: * No power connection: Ensure the power adapter is correctly plugged into the transmitter's power socket. * Incorrect battery assembly: Verify the battery is assembled correctly, paying attention to the polarity. Reassemble it properly if it's in the wrong way.