Need help?Do you have a question about the TALAMEX SMART and is the answer not in the manual?
General| Brand | TALAMEX |
|---|---|
| Model | SMART |
| Category | Battery Charger |
| Language | English |
Do not use for dry-cell batteries; use only for lead-acid batteries to prevent bursting.
Avoid operating with damaged cords or immersing in water to prevent electric shock or fire.
Batteries produce explosive gases; operate in a well-ventilated area, at least 18 inches above floor.
Follow safety guidelines for handling batteries, including eye protection, avoiding sparks, and removing metal items.
Immediately wash skin or clothing with soap and water for 10 minutes and seek medical attention.
Immediately flush eyes with water for at least 15 minutes and seek immediate medical attention.
Connect red terminal to POSITIVE and black terminal to NEGATIVE posts before AC connection.
Connect AC power cord to outlet; Power LED indicator turns on. Charger auto-selects voltage.
Error LED indicates reverse polarity or faults. Flashing indicates battery issues or uncharged state.
Charger checks battery status and begins low current charging for deeply discharged batteries.
Returns 80% of energy, performing in multi-stages with selectable charge rates for 12V/24V batteries.
Uses constant low current (1.5A) to raise voltage and achieve almost 100% charge.
Monitors terminal voltage and initiates pulse charging to maintain battery health indefinitely.
Suitable for 14-230Ah 12V batteries, providing constant 13.6V/5A for applications like Golf Carts.
Can be used as a power supply (13.6V/5A) for 12V DC appliances without a battery.
Steps to activate 13.6V supply mode: disconnect battery, plug AC, press MODE button for 3-5s.
To Next Page