TALAMEX SMART BATTERY CHARGER 10A
MANUAL 0012015/16
9
5. Supply 13.6V
As soon as charging instruction is given to the charger, the unique function automatically checks status of
battery (detects voltage). If a deeply
discharged battery's voltage is over 4.5V ± 0.5V (for 12V battery) or 16V ± 0.25V (for 24V battery), charger
begins charging with 1.5A low current
to recover it, which terminates when voltage reaches to 10.5V ± 0.25V for (12V battery) or 21V ± 0.25V (for
24V battery) at the beginning of the
process, the charger skips low current charging and it switches over to charging mode.
a) Maintenance of 12V SLA batteries:This mode is suitable for maintenance of 12V batteries with capacity
range from 14-230Ah.
The charger delivers a constant output of 13.6V/5A. This is maintenance mode for applications where
maximum capacity from the battery is
required, such as Golf Carts, Floor sweepers, etc.
b) Power source: It is also used as a power supply, without attaching a battery in this mode. The charger
delivers 13.6V/5A.
To enter the 13.6V supply mode, here the steps:
a. Disconnect the battery;
b. Plug in the AC power;
c. Press the MODE button for 3~5 seconds to active the function;
When this mode is activated, the charger MAX output will be 13.6V/ 5A.
In this mode, we can use the charger as a Power Supply to provide constant power to 12V DC appliances with
5A(max) output current.
TECHNICAL DATA:
Input Voltage:
200-260VAC, 50Hz
Output Voltage:
12V & 24V (auto-select)
Efficiency:
>75%
Charging Voltage:
14.4V
±
0.25V or 28.8V
±
2%
Charging Current:
10A
±
10% or 7.5A
±
10% or 5A
±
10% or 4A
±
10% or 3A
±
10% or 2A
±
0.3A or 1.5A
±
0.3A
Ambient Temp:
-10
℃
to +40
℃
, Reduced output power at higher temperature
Battery Types:
12V & 24V lead-acid batteries (WET, MF, AGM and GEL)
Noise level
＜
50db
（
Tested from a distance of 19.5inch or 50cm
）
with mini cooling fan inside
To Next Page
Loading...