Need help?Do you have a question about the Talgil BERMAD Irrigation BIC 1000 DC and is the answer not in the manual?
Key advantages and capabilities of the BIC 1000 DC controller.
Details power supply, outputs, and inputs for the BIC 1000 DC controller.
Exits edit mode and returns to the previous screen without changing data.
Enters edit mode for changes and confirms selections.
Chooses desired values/options for editing fields.
Rotates between configuration subjects and programs.
Buttons representing different subjects controlled by the controller.
Step-by-step guide to setting the current time on the controller.
Instructions for setting the number of days in the irrigation cycle.
Guide to setting the current day for the irrigation schedule.
How to set irrigation days and start times for a program.
Detailed steps for enabling or disabling irrigation for specific days.
Instructions for defining the start times for irrigation programs.
Guide to setting the duration for water irrigation per valve or group.
Instructions for setting the run time for fertilizer pumps.
Adjust water run times by a percentage for a selected program.
Steps to set the percentage adjustment for irrigation run times.
Defines a specific time to stop all program operations.
Guide to setting a specific time to halt program operations.
How to set a delay between irrigation cycles for a program.
Instructions for defining a fixed number of irrigation cycles.
Steps to manually pause a program for a set period or endlessly.
How to manually start a full irrigation cycle.
Start program from a specific valve or group.
Steps to manually activate a single valve.
Indicates a program lacks defined water run times.
Indicates a program lacks start times or irrigation days.
Shows a program is scheduled for irrigation later today.
Indicates the next irrigation day for a program is in two days.
Shows the active valve/group and current stage of the program.
Indicates a program is paused until a specified time.
Lists valves or groups included in the current irrigation program.
Displays the remaining time for the currently active valve.
Shows start and stop times calculated from run times.
Displays total water run time for a start, considering all valves.
Displays total fertilizer run time per start, multiplied by starts.
How to group multiple valves to operate simultaneously in programs.
Steps to define or edit groups of valves.
How to assign or unassign valves to a specific group.
Guide to choosing between Water Before and Water After settings.
Steps to set the time for water before fertilization.
How to set the time interval between filter back-flushing cycles.
Steps to define the duration of the filter back-flushing cycle.
How to set a delay before the filter back-flushing process begins.
Steps to define the dwell time between filter back-flushing stages.
Displays various statuses of the filter back-flushing cycle.
Steps to manually initiate or stop a filter flush cycle.
Steps to set the number of days the rain delay will be active.
How to manually open or close individual outputs on the controller.
Overview of input states with abbreviations for connected devices.
Steps to define the duration for each output during a test cycle.
Guide to initiating the output test cycle.
Check the communication status of Radio RTUs with the controller.
View and reset the RTU error log for communication issues.
Quick view of the status of all four programs.
View system flow if a water meter is connected.
Track accumulated water run time per valve and system.
Displays accumulated water run time for individual valves.
General| Category | Controller |
|---|---|
| Type | Irrigation Controller |
| Power Source | DC |
| Model | BIC 1000 DC |
| Manufacturer | Talgil BERMAD |
To Next Page
