To Next PageTo Next Page
Need help?Do you have a question about the Talgil FILTRON 1-10 DC and is the answer not in the manual?
General| Brand | Talgil |
|---|---|
| Model | FILTRON 1-10 DC |
| Category | Controller |
| Language | English |
Defines the duration of the flushing time per station. Selectable in steps of 1 sec, 5 sec, or 0.5 min.
Defines the pressure difference for flushing cycle trigger. Range varies based on PSI or BAR.
Defines how flushing cycles are triggered: OFF, By time, or DP only.
Unit accumulates and displays flushing cycle counts by DP, time, or manually.
Process to enter configuration and adjust features like Main Valve, Dwell time, and DP delay.
Detects and indicates endless looping via DP sensor exceeding the configured limit.
Indicates low pressure with a blinking symbol, stopping activities and flushing sequences.
Details connecting DP sensor tubes to filter inlet (red) and outlet (black).
Alerts for low battery levels, with the second level shutting down all outputs.
Allows manual flushing sequence activation or termination using the 'MANUAL' key.
Illustrates valve operations over time, with and without a delay valve.
Shows the wiring connections for the DC model, including solenoids and DP sensors.
Illustrates wiring for the AC model, detailing power supply, solenoids, and DP sensors.
