Need help?Do you have a question about the Talgil The Dream 2 and is the answer not in the manual?
Describes the keyboard layout and function keys of the controller.
Explains the procedure for powering the DREAM 2 controller on and off safely.
Details the components and functions of the controller's power supply board.
Identifies and describes the components on the controller's central processing unit (CPU) board.
Explains how the DREAM 2 system connects to and uses the internet for communication.
Guides users on navigating the DREAM system's menus and interface.
Describes the information and functions available on the system's "ABOUT" screen.
Configures fundamental system-wide parameters and settings.
Defines operating parameters for the main control valves.
Sets constants related to the operation of irrigation lines.
Defines constant parameters specific to individual irrigation valves.
Configures the ratio and behavior of water meters.
Sets constants for fertilizer injectors and their behavior.
Defines parameters for filter sites, including flushing cycles.
Defines the order of valves for irrigation programs.
Calculates irrigation water based on evaporation data.
Sets seasonal limits for fertilizer usage to prevent over-application.
Configures serial injection of fertilizers, avoiding mixing.
Sets up programs to repeat multiple times within a day.
Enables irrigation cycles based on accumulated light levels.
Manages and defines various conditions for program control.
Displays the status of all system outputs and allows manual activation.
Shows the status of digital and analog sensor inputs.
Displays the real-time flow rates for all water meters.
Shows the flow rates for all fertilizer meters.
Reports communication status with Remote Terminal Units (RTUs).
Manages and defines conditions that influence program operation.
Lists and categorizes all events that occur within the system.
Configures and manages water sources and pump operations.
Manages satellite outputs and their conditional activation.
Links satellite outputs to other system outputs for coordinated operation.
Defines satellites that activate based on specific conditions.
Creates calculated water meters from real meter data.
Configures virtual meters for tracking irrigation water usage.
Sets up virtual meters to monitor network water balance and detect leaks.
Configures virtual meters to measure water supplied by sources.
Configures and defines types for analog sensors.
Customizes system behavior, hides features, and sets default parameters.
General| Brand | Talgil |
|---|---|
| Model | The Dream 2 |
| Category | Controller |
| Language | English |
To Next Page
