Talgil The Dream 2 - 9.5 Rain Shutdown; 9.6 Frost protection

- 44 -
9.5 Rain Shutdown
The Rain Shutdown is meant to delay irrigation programs when the amount of the
daily accumulated rain reaches the user defined limit. The Programs affected by the
Rain Delay will be those with priority less than 5.
Notice that:
When the Rain Delay left is manually set to a nonzero value, it will cause the
rain delay to be started right away.
Prior to using the Rain Shutdown option it must be enabled at the DEALERS
DEFINITIONS.
9.6 Frost protection
The Frost protection algorithm is taking into consideration the Current
temperature and Dew point for calculating at which temperature the frost
protection program should be started in order not to let the crop temperature drop
to the Critical temperature defined by the user. The Dew point is calculated based on
the ambient temperature and humidity. When the Frost protection program is
activated, all irrigation programs with priority lower than 6 will be halted.
The amount of rain fall that when
reached will activate the delay
The number of days
the delay will last
The number of days
still left to delay
The Critical temperature
that must not be reached
The frost protection will stop
when the temperature rises above
the critical temp by this value
The program number to
be activated when the
frost protection will start
Manual start
of the frost
protection
The temperature at which
the protection will start