14
Static Foam Mattresses
Installation and User Guidelines
MATTRESSES
1. Ensure the bed frame to be used has no existing
mattress components, and is free from items which
could cause damage to the POLYFLOAT SUPREMA™ /
POLYFLOAT DORMIRA™ mattress.
It should be noted that this mattress is intended to
completely replace the existing mattresses.
2. Place the POLYFLOAT SUPREMA™/ POLYFLOAT DORMIRA™
mattress on the bed frame, with the printed cover uppermost and the non-slip base
facing downwards.
3. Place the user manual in a safe place for future use.
The POLYLOAT SUPREMA™ / POLYFLOAT DORMIRA™ mattress can be used on profiling bed
frames, slatted frames, in-filled frames and divans.
A gap of 2.5cm either side of the mattress should not be exceeded when side rails are
deployed.
CUSHIONS
Place the POLYFLOAT™ cushion onto a chair, ensuring cushion is placed the correct way up.
N.B. It should be noted that the use of a foam cushion will increase the patient’s seated
height by approximately 5cm, and care should be taken to ensure the patient’s comfort and
security regarding height of foot and arm rests.
MAXIMUM USER WEIGHT GUIDELINES
POLYFLOAT SUPREMA™ mattress:- 250kg (39 stone) max.
POLYFLOAT DORMIRA™ mattress:- 250kg (39 stone) max.
POLYFLOAT™ cushion:- 160kg (25 stone) max.
Care and Maintenance
The POLYFLOAT SUPREMA™ / POLYFLOAT DORMIRA™ mattress / POLYFLOAT™ cushion will
provide years of efficient service if it is cared for in the following way:
COVER
Always keep the mattress/cushion cover as clean as is practicable. The material is waterproof
and vapour permeable.
To Next Page
Loading...