Need help?Do you have a question about the Tamiya TT-01 Chassis and is the answer not in the manual?
General| Chassis Type | TT-01 |
|---|---|
| Drive | 4WD |
| Suspension | 4-wheel independent double wishbone |
| Differential Type | Gear Differential |
| Motor | 540-type |
| Chassis Material | Plastic |
| Scale | 1/10 |
| Wheelbase | 257mm |
| Gear Ratio | 8.35:1 |
| Drive Type | Shaft-driven 4WD |
| Differential | Front and Rear Gear Differential |
| Width | 185mm |
| Required Equipment | 2-channel radio, ESC, servo, 7.2V battery & charger |
| Gear Ratio (with kit-standard pinion and spur gears) | 8.35:1 (varies with pinion gear) |
To Next Page