To Next PageTo Next Page
Need help?Do you have a question about the Tamiya HOTSHOT and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Drive | 4WD |
| Motor | 540 Type |
| Suspension | Independent Double Wishbone |
| Body Material | Polycarbonate |
| Width | 235 mm |
| Height | 150 mm |
| Chassis | ABS Monocoque |
| Type | RC Buggy |
| Chassis Material | ABS plastic |
| Shock Absorbers | Oil Filled |
| Tire Type | Pin Spike |
| Required Equipment | 2-Channel Radio, Servo, Electronic Speed Controller, Battery, Charger |
Details the recommended 2-channel R/C system for the model.
Specifies the required battery types for the model.
General safety warnings and advice for model assembly and operation.
Steps for assembling the rear gearbox components.
Steps for mounting the motor and pinion gear.
Steps for assembling the main chassis of the model.
Steps for assembling the shock absorber components.
Instructions for charging the running battery.
Step for installing the R/C receiver and ESC.
Guide on how to operate the radio transmitter.
Steps for installing tires onto the wheels.
Steps for attaching the wheels to the car.
Steps for installing the running battery into the car.
Instructions for cutting out and preparing the car body.
Steps for painting the car body from the inside.
Instructions on operating the R/C car safely and correctly.
Guide to diagnosing and fixing common problems with the R/C car.
