EasyManua.ls Logo

Tanaka TCG 24EASP(SL) - Engine Starting Procedure

Tanaka TCG 24EASP(SL)
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
English
Fueling
WARNING
Always shut o the engine before refueling.
Slowly open the fuel tank, when lling up
with fuel, so that possible over-pressure
disappears.
Tighten the fuel cap carefully, after fueling.
Always move the trimmer at least 10 ft (3 m)
from the fueling area before starting.
Always
wash any spilled fuel from clothing
immediately with soap.
Be sure to check for any fuel leakage after
refueling.
Before fueling, clean the tank cap area carefully,
to ensure that no dirt falls into the tank. Make sure
that the fuel is well mixed by shaking the container,
before fueling.
Starting
CAUTION
Before starting, make sure the cutting
attachment does not touch anything.
1. Set ignition switch (24) to ON position. (Fig. 21,
22)
26
24
Fig. 21
24
Fig. 22
* Push priming bulb (25) several times so that fuel
ows through return pipe (39). (Fig. 23)
25
39
Fig. 23
2. Set choke lever (27) to CLOSED position (A).
(Fig. 24)
27
B
A
Fig. 24
3. Pull recoil starter briskly, taking care to keep the
handle in your grasp and not allowing it to snap
back. (Fig. 25)
Fig. 25
000BookTCG22EASUS.indb13000BookTCG22EASUS.indb13 2012/07/1116:42:432012/07/1116:42:43

Other manuals for Tanaka TCG 24EASP(SL)

Related product manuals