Tanaka TCG 24EBSP (SL) User Manual

Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
TCG24EBSP (SL)
TCG 24EBSP (SL)
TCG 24EBDP (SL)
TCG 27EBSP (SL)
TCG 27EBDP (SL)
Grass Trimmer
Coupe-Herbes
Motoguadañas
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before they
use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi
doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
000BookTCG24EBSPUS.indb1000BookTCG24EBSPUS.indb1 2014/03/2615:11:342014/03/2615:11:34

Tanaka TCG 24EBSP (SL) Specifications

General

Brand	Tanaka
Model	TCG 24EBSP (SL)
Category	Trimmer
Language	English

Summary

Safety Instructions and Instruction Manual

Meanings of Symbols

Explanation of various safety and operational symbols used on the machine and in the manual.

Parts Identification

Diagrams and labels identifying key components of the grass trimmer.

Detailed Safety Guidelines

Comprehensive safety instructions covering operator, machine, and fuel handling.

Specifications

Assembly Procedures

Attachment Installation

Steps to securely attach the cutting equipment to the drive shaft.

Handle Installation and Adjustment

Attaching and adjusting the handle for comfortable operation.

Throttle Wire and Stop Cord Connection

Connecting the throttle wire and stop cord to the carburetor and air cleaner.

Cutting Attachment Guard Installation

Mounting the guard bracket and securing the cutting attachment guard.

Semi-Auto Cutting Head Installation

Steps for installing the semi-auto cutting head and its components.

Nylon Line Length Adjustment

Procedure for adjusting the nylon cutting line length before operation.

Operating Procedures

Fueling the Trimmer

Step-by-step guide for safely fueling the engine, including mixing fuel and oil.

Starting the Engine

Instructions for safely starting the two-stroke engine, including choke and recoil starter use.

Cutting Operation

Proper technique for cutting grass, engine speed, and safety zone.

Stopping the Engine

Procedure for safely shutting off the engine.

Semi-Auto Cutting Head Operation

Operating the semi-auto cutting head, including line feeding and clutch engagement.

Carburetor and Filter Maintenance

Carburetor Adjustment Procedures

Adjusting the idle speed screw (T) for correct cutting attachment behavior.

Carburetor Malfunctions and Issues

Common issues related to carburetor performance and potential causes.

Air Filter Cleaning

Instructions for cleaning the air filter to ensure proper engine operation.

Fuel Filter Cleaning

Procedure for draining and cleaning the fuel filter element.

Component Maintenance and Schedule

Spark Plug Maintenance

Checking, cleaning, and replacing the spark plug for optimal engine performance.

Angle Transmission Grease Check

Checking and refilling the grease level in the angle transmission.

Nylon Line Replacement

Steps for removing and replacing the nylon cutting line in the semi-auto cutting head.

Maintenance Schedule Overview

Summary of daily, weekly, and monthly maintenance tasks.

Daily Maintenance Tasks

Routine checks and cleaning for the unit's exterior and components.

Weekly Maintenance Tasks

Regular inspections of starter, spark plug, and angle gear.

Monthly Maintenance Tasks

Periodic cleaning of the fuel tank, carburetor, and fan.

Troubleshooting Guide

Engine Not Starting Issues

Diagnosing and resolving issues when the engine fails to start.

Fuel System Troubleshooting

Common fuel system problems and their solutions.

Electrical System Troubleshooting

Diagnosing and fixing electrical system faults.

Engine Performance Problems

Resolving problems like engine cutting out, overheating, or abnormal vibration.

Cutting Attachment and Movement Issues

Troubleshooting problems related to the cutting attachment not moving or rotating incorrectly.

Stopping and Control Issues

Addressing issues where the engine or blade does not stop or respond to throttle.