Tanaka TCS 40EA Handling Instructions

English
7
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Chain saw, Portable
TCS40EA
Engine size
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Spark plug
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Fuel tank capacity
Always wear eye, head and ear protectors when
using this unit.
Chain oil tank capacity
Warning, kickback danger. Be careful of
possible sudden and accidental upward and/or
backward motion of the guide bar.
kg
Dry weight
(Without guide bar and chain)
One-handed usage not permitted. While
cutting, hold chain saw fi rmly with both hands
with thumb fi rmly locked around front handle.
Guide bar length
Chain brake
÷ 2
Chain pitch
Choke Chain gauge
On/Start
L
p
A
ISO22868
Sound pressure level LpA*
1
by ISO 22868
Off /Stop
L
A
w
ISO22868
Sound power level LwA*
2
Measured by ISO 22868
Emergency stop
L
A
w
2000/14/EC
Sound power level LwA*
2
Measured/Guaranteed by 2000/14/EC
Fuel and oil mixture
a
hv
Vibration level by ISO 22867
Front handle*
1
/ Rear handle*
1
Chain oil fi ll
K
Uncertainty
Carburetor adjustment - Idle speed
P
Max. engine power by ISO 7293
Carburetor adjustment - Low speed mixture
MAX
Max. engine speed
Carburetor adjustment - High speed mixture
MIN
Idle engine speed
Oil pump adjustment Type of chain
Priming pump Max. chain speed
4
Guaranteed sound power level Number of teeth of drive sprocket
(Original instructions)
000BookTCS40EA.indb7000BookTCS40EA.indb7 2014/11/2515:44:502014/11/2515:44:50

Tanaka TCS 40EA Specifications

General

Brand	Tanaka
Model	TCS 40EA
Category	Chainsaw
Language	English