Tanaka TCS 51EA User Manual

Chain Saw
Model TCS 51EA
Handling instructions
Note:
Before using this machine, carefully read through these HANDLING INSTRUCTIONS
to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be
kept readily available as an important reference when using this machine.
000BookTCS51EAEng.indb1000BookTCS51EAEng.indb1 2017/12/188:49:132017/12/188:49:13

Tanaka TCS 51EA Specifications

General

Brand	Tanaka
Model	TCS 51EA
Category	Chainsaw
Language	English

Summary

Tanaka Chain Saw Model TCS 51EA Handling Instructions

Meanings of Symbols

What is What? (Part Identification)

Warnings and Safety Instructions

Operator Safety

Covers essential safety precautions for the operator, including protective gear and personal condition.

Unit/Machine Safety

Details safety checks and precautions for the chain saw unit itself before and during operation.

Fuel Safety

Provides critical safety guidelines for handling and using fuel, emphasizing precautions against ignition.

Cutting Safety

Outlines safe practices and techniques to prevent injuries during cutting operations.

Maintenance Safety

Highlights safety procedures and precautions related to the maintenance of the unit.

Transport and Storage

Details safe methods for transporting and storing the chain saw to prevent accidents.

Kickback Danger

Explains the severe danger of kickback, how it occurs, and how to prevent it.

Specifications

Assembly Procedures

Operating Procedures

Fueling and Fuel Handling

Instructions on the correct type of fuel, safe fueling procedures, and handling precautions.

Chain Oil and Supply Adjustment

Details on chain oil filling, and how to adjust the oil supply rate for lubrication.

Chain Brake Operation and Testing

Explains how the chain brake works, how to activate/deactivate it, and how to test its effectiveness.

Engine Starting Procedure

Step-by-step guide on how to safely start the chain saw engine, including choke and decompression valve usage.

Engine Stopping Procedure

Procedure for safely shutting down the chain saw engine using the ignition switch.

Basic Techniques for Wood Cutting

General Cutting Safety and Warnings

Covers general warnings, precautions, and kickback dangers during wood cutting operations.

Felling Trees

Provides instructions and considerations for safely felling trees, including notch cutting and hinge formation.

Limbing and Bucking Techniques

Techniques for safely removing branches and cutting logs, avoiding kickback and pinching.

Cutting Thick Logs and Stuck Saw Recovery

Methods for cutting thick logs and instructions on safely freeing a stuck chain saw.

Maintenance

Carburetor and Idle Speed Adjustment

Guide to adjusting the carburetor for optimal performance, focusing on idle speed settings.

Air Filter and Spark Plug Maintenance

Instructions for cleaning/replacing the air filter and inspecting/servicing the spark plug.

Lubrication System Maintenance

Procedures for cleaning oiler port, guide bar, and maintaining the fuel filter for proper lubrication and engine function.

Cleaning and Protection Systems

Tasks for cleaning chain oil filter, cylinder fins, and operating the icing protection system.

Chain Sharpening and Depth Gauges

Comprehensive guide on sharpening the saw chain, including parts, techniques, and depth gauge adjustment.

Sharpening Angles and Specifications

Specifies the correct angles and settings for sharpening the saw chain cutters and depth gauges.

Maintenance Schedule