Tanaka TCS 33EB User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other users
and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar
lesiones graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda
este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan
leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado
en un lugar seguro.
Model
Modèle
Modelo
TCS 33EB
Chain Saw
Tronçonneuse
Motosierra
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
000BookTCS33EBUS.indb1000BookTCS33EBUS.indb1 2012/10/0518:17:232012/10/0518:17:23

Tanaka TCS 33EB Specifications

General

Brand	Tanaka
Model	TCS 33EB
Category	Chainsaw
Language	English

Summary

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL

SAFETY PRECAUTIONS FOR CHAIN SAW USERS

Kickback safety precautions

Understanding kickback to prevent accidents and injuries.

Other safety precautions

General safety guidelines for operating the chain saw safely.

MEANINGS OF SYMBOLS

WHAT IS WHAT?

WARNINGS AND SAFETY INSTRUCTIONS

Operator safety

Essential safety gear and practices for the chain saw operator.

Unit/machine safety

Pre-operation checks and maintenance for safe unit operation.

Fuel safety

Safe handling and storage procedures for fuel.

ADDITIONAL SAFETY GUIDELINES

Cutting safety

Safe techniques and precautions for cutting wood with the chain saw.

Maintenance safety

Guidelines for safe maintenance procedures and parts replacement.

Transport and storage

Proper methods for safely transporting and storing the chain saw.

SPECIFICATIONS

ASSEMBLY PROCEDURES

OPERATING PROCEDURES

Fuel (Fig. 10)

Information on fuel types, mixing, and handling for the chain saw.

Fueling (Fig. 11)

Step-by-step guide for safely refueling the chain saw.

Chain oil (Fig. 11)

Instructions for filling and using chain oil.

ENGINE STARTING PROCEDURES

Starting the cold engine (Fig. 12-17)

Detailed steps for starting a cold chain saw engine.

Starting the warm engine

Procedure for starting a chain saw engine that has recently been used.

Chain lubrication test

How to verify proper chain oil discharge during operation.

CHAIN BRAKE AND ENGINE STOPPING

Confirm chain brake activation

Method to check if the chain brake is functioning correctly.

Stopping the engine (Fig. 21)

Procedure for safely shutting down the chain saw engine.

CHAIN CATCHER AND CUTTING TECHNIQUES

Chain catcher

Description of the chain catcher safety feature.

Basic felling, limbing, and bucking techniques

Introduction to fundamental wood cutting methods.

FELLING AND LIMBING TREES

Basic rules for felling trees

Fundamental principles for safely cutting down trees.

Limbing

Techniques for safely removing branches from a felled tree.

ADVANCED CUTTING TECHNIQUES

Limbing thick branches

Specific methods for limbing thicker branches safely.

Cross cutting/bucking

Techniques for cutting logs into smaller sections.

Cross cutting logs, pressure on top

Safe cutting method for logs with pressure on the top.

Cross cutting logs, pressure on bottom

Safe cutting method for logs with pressure on the bottom.

Thick log, larger than guide bar length

Methods for cutting logs longer than the guide bar safely.

TROUBLESHOOTING AND MAINTENANCE

If the saw gets stuck

Procedure for freeing a stuck chain saw.

Carburetor adjustment (Fig. 34)

How to adjust the idle speed of the carburetor.

Air filter (Fig. 35)

Instructions for cleaning and maintaining the air filter.

COMPONENT MAINTENANCE

Spark plug (Fig. 36)

How to inspect, clean, and gap the spark plug.

Oiler port (Fig. 37)

Maintenance for the chain oiler port.

Guide bar (Fig. 38)

Cleaning and maintaining the guide bar.

Side case (Fig. 39)

Keeping the side case and drive area clean.

Fuel filter (Fig. 40)

How to clean or replace the fuel filter.

Chain oil filter (Fig. 41)

How to clean the chain oil filter.

ENGINE AND CHAIN CARE

Cleaning the cylinder fins (Fig. 42)

How to clean cylinder fins to prevent overheating.

Icing protection system (Fig. 43, 44)

How to use the system to protect the carburetor from icing.

For long-term storage

Procedures for preparing the unit for extended storage.

CHAIN SHARPENING

Parts of a cutter (Fig. 45, 46)

Identification of the components of a saw chain cutter.

CHAIN SHARPENING TECHNIQUES

Lowering depth gauges with a file

How to adjust depth gauges when sharpening the chain.

General instructions for filing cutters

Steps for sharpening the saw chain cutters with a file.

REPLACEMENT PARTS AND MAINTENANCE SCHEDULE

Replacement bar and chain combination

Table of compatible bar and chain combinations.

Maintenance schedule

Recommended maintenance tasks by frequency.