Tanaka TCS 40EA - User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this
manual BEFORE operating the power tool. Please keep this manual available for other users and owners
before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi
doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede provocar lesiones
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
Model
Modèle
Modelo
TCS 40EA
Chain Saw
Tronçonneuse
Motosierra
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
000BookTCS40EAUS.indb1000BookTCS40EAUS.indb1 2012/08/109:30:362012/08/109:30:36

Summary

Safety Instructions and Instruction Manual

Chain Saw User Safety

Kickback Safety Precautions

Detailed guidance on preventing kickback injuries from chainsaw operation.

General User Safety

General Safety Instructions

Operator Safety Guidelines

Essential safety practices for the operator, including protective gear and physical condition.

Machine and Fuel Safety

Operational Safety

Cutting Safety Precautions

Specific safety measures to follow while operating the chainsaw for cutting tasks.

Operating Procedures

Fuel Handling and Fueling

Detailed steps for safely fueling the chainsaw, including fuel mix and precautions.

Engine Starting Procedures

Starting a Cold Engine

Step-by-step guide for starting a cold chainsaw engine, including choke and priming.

Warm Engine Operation

Stopping the Chainsaw

Cutting Techniques Overview

Basic Cutting Techniques Introduction

Introduction to fundamental techniques for felling, limbing, and bucking wood with a chainsaw.

Felling a Tree

Felling Cut Techniques

Specific methods for making felling cuts, including considerations for trunk diameter.

Limbing Tree Branches Safely

Safe practices for removing branches from a felled tree, emphasizing kickback avoidance.

Log Cutting Strategies

Cutting Thick Logs

Cross Cutting and Bucking Logs

Carburetor and Air Filter

Idle Speed Adjustment

Chain Sharpening Guide

Depth Gauge Adjustment

Filing Chain Cutters

Maintenance Schedule

Pre-Use Inspection

Tanaka TCS 40EA Specifications

General

Brand	Tanaka
Model	TCS 40EA
Category	Chainsaw
Language	English