Need help?Do you have a question about the TANDBERG TR 2080 and is the answer not in the manual?
Instructions for dismantling the plunger of a push-button switch for cleaning or replacement.
Procedure for removing and replacing the FM stereo indicator lamp unit.
Steps for fitting and routing the scale drive cord for the tuning mechanism.
Procedure for AM alignment using an oscilloscope and frequency counter.
Procedure for AM-IF alignment using a wobbler.
Procedure for AM-IF alignment without a wobbler.
Alignment for antenna, ferrite, and HF circuits using a wobbler.
Alignment for antenna, ferrite, and HF circuits without a wobbler.
Procedure for AM alignment using a signal meter.
Steps for aligning the FM stereo decoder.
Procedure to adjust channel separation in the stereo decoder.
Adjusting muting and stereo/mono switching levels.
Procedure for measuring and adjusting quiescent current.
Troubleshooting note for power-off pops, with part number changes.
To Next Page
General
