Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the
selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input
source has not been selected.
REMOTE CONTROL
Remote control functions
1 System off:
2 0-9 Digits:
3 CD:
4 Random:
5 Repeat:
6 Previous/Fast reverse:
7 Stop:
8 Eject:
13 Play/Pause:
14 Next/Fast forward:
Sets all devices in the hifi 200 series into
standby
Selects tracks on the CDP-200.
Turns the CDP- and AMP-200 on and selects the CD
input on the AMP-200.
The DVD, TUNER, AUX1, AUX2, AUX3 and PHONO
buttons will set the CDP-200 into standby.
All tracks on the disc loaded in CDP-200 are
played in random order.
Repeats a single track or all tracks on a disc on
CDP-200
Selects the previous track on
CDP-200. Press and hold to rewind playback
Stops playback on CDP-200
Opens and closes the disc tray on the CDP-200
Starts and pauses playback on CDP-200.
Selects the next track on CDP-200.
Press and hold to fast forward playback
9 +10:
10 Display:
11 Memory:
12 Enter:
Use this button along with the 0-9 digits to select
tracks on the CDP-200 above 10. For example press the
+10 button and the 5 digit to select track 15 on a disc.
Canges between showing the time of Track
Elapsed, Track Remain and Disc Remain on the display
Use this button to set the playback order to a
prefered order.
Use this button when setting the memory playback
order.
10
1
2
3
4
5
6
7
8
9
10
13
14
POWER
HIFI-200
VOLUME
0
1
2
34
5
6
78
9
10+
TUNINGTUNING
STATION
CD
TUNER
AUX1
AUX2
DVD
AUX3
PHONO
T MODE
AUTOTUNE
MUTETITLE
SETUP MENUAUDIO
SUBTITLE
STATION
ENTER
ST/MO MEMORY
DISPLAY
SLOWRANDOMREPEAT
11
12
To Next Page
Loading...
Need help?
General
