Why is there no sound coming from my Tangent CD Player?
If there is no sound coming from your Tangent CD Player, there might be several reasons: * The unit might not be turned on. * There might be an incorrect connection to the amplifier. * No loudspeakers might have been connected to the amplifier. * There might be no CD in the unit.
How to fix a Tangent CD Player that won't turn on?
If your Tangent CD Player isn't turning on, try the following: * Ensure the electric current is switched on at the socket. * Verify the plug is correctly inserted into the socket. * Note that if the internal fuse has blown, it must be replaced by a qualified service technician. * A damaged power cord must be replaced.
What to do if my Tangent CD Player won't read the disc?
If your Tangent CD Player won't read the disc, check these things: * Make sure the disc isn't upside down. * See if the disc is clean and undamaged. * Confirm whether it's a standard CD or a CD-R.
Why does my Tangent CD Player skip during playback?
If your Tangent CD Player skips during playback, consider the following: * Ensure the disc is clean and undamaged. * Check that the unit is positioned on a stable surface.
How to eliminate buzzing sound from Tangent CD Player?
If you hear a buzzing sound, it could be due to: * Damaged RCA cables between the CDP-100 and the amplifier/receiver. * RCA cables between the CDP-100 and the amplifier/receiver being wound around the power cord.
General| Type | CD player |
|---|---|
| Signal to Noise Ratio | >90dB |
| Total Harmonic Distortion | <0.05% |
| Disc formats | CD, CD-R |
| Output | Analog (RCA) |
| Frequency Response | 20Hz - 20kHz |
| Output voltage | 2V RMS |
To Next Page
