OPERATION AND FUNCTIONS
Forward and rewind
It is possible to perform a search in the track played.
If you wish to search forward, depress the >> (forward) button
on the remote until you get to that part of the track that you
wish to hear, and then press play. You will see that the time
counter in the display counts up very quickly.
To increase the search speed press 2 or 3 times on the >>
button.You will see that the the information on the display
changes between “>”, “>>” and “>>>”, which indicates the
speed.
If you wish to search backward, use the same procedure as
when you search forward, but use the << (Rewind) button
instead.
It is possible to activate the search function by turning the
rewind/forward button on the front panel.
Random
It is possible to select random play by pressing the RANDOM
button on the remote control or the front panel.
The CD tracks will be played in random order. The dash
between the first and second number from the left starts to
flash when this functiopn has been activated.
It is possible to activate random play both in stop mode and
during playback.
Press the RANDOM button again if you wish to deactivate
random play.
Note:
When you press I<< or >>I during random play, it will not be
possible to select the next track but any other track.
16
CD 20-008-04:26
Flashing when random
is activated
CD > 20-008-04:26
To Next Page
Loading...
Need help?
General
